An easy to use Jig that aids in the filing of the code 40 Flat Bottom 'foot' (bottom) of the stock rails and also filing the tapered flare of the wing and check rails.

One side of the jig holds the stock rail in position allowing the 'foot' to be filled down to match the head width, which is nessesary for turnout 'Stock Rails' that use Flat Bottom rail, where the switch blades need to rest against the stock rail head.

The other side of the jig allows filing the tapered 'flare' of the wing and check rails.

1 Metre of Finetrax Wooden Sleeper Bullhead Code 40 Flexi Track.

1 Metre of Finetrax Concrete Sleeper Flat Bottom Code 40 Flexi Track.

Kit to build an 00 Gauge B7 turnout with code 75 Bullhead Rail.

Kit to build an EM Gauge B7 turnout with code 75 Bullhead Rail.

Kit to build a 00-SF B7 turnout with code 75 Bullhead Rail.

Kit to build an EM Gauge 1in7 Diamond Crossing with code 75 Bullhead Rail.

Kit to build a 00 Gauge 1in7 Diamond Crossing with code 75 Bullhead Rail.

Kit to build an EM Gauge A5 turnout with code 75 Bullhead Rail.

Kit to build a 00 Gauge A5 turnout with code 75 Bullhead Rail.

Kit to build a 00-SF Gauge A5 turnout with code 75 Bullhead Rail.

Kit to build an EM Gauge 1in7 Double Slip with code 75 Bullhead Rail.

Kit to build a 00 Gauge 1in7 Double Slip with code 75 Bullhead Rail.

Kit to build a 00-SF 1in7 Double Slip with code 75 Bullhead Rail.

Kit to build a 00 Gauge 1in7 Single Slip with code 75 Bullhead Rail.

Kit to build a 00-SF Gauge 1in7 Single Slip with code 75 Bullhead Rail.